Customer Login | Home | Contact Us | Download Brochure

Custom Design

The ESP team can make any custom design a reality.

Yes, we can do custom glass racks too!

Glass Racks can be any reasonable length and width and the stemware rods that hold the glassware can be fabricated to any depth required.

Post height is determined by measuring 82" from the floor to the bottom of the stemware on the unit for either ceiling hung or counter mounted units.

Custom glass racks can be fabricated in an all-welded design, requiring the same packaging and shipping as our all welded food shield units, and all of our custom finishes apply.

A Rainbow of Colors

Need a unique look to match your decor? We offer tubing in over 22 powder coated color finishes. Powder coating on steel tubing is scuff and chip resistant for a finish that will last.

If You Can Imagine It... ESP Can Build It!

Custom Foot Rails a Specialty

We can custom bend your foot rails to any bar configuration imaginable. We have been expertly bending and mitering tubing for almost 40 years.  All that will be required is either an architectural plan drawing with bar face radius measurements or in most cases a simple paper template of the bar face.

We try to cut the foot rails so they are easily shipped via UPS. If not, they ship via Motor Freight and additional packaging and shipping applies. Again, all of our custom finishes apply.

Custom Food Shields

Our entire line of food shield posts can be custom fabricated to any configuration and size desired. We can also fabricate all welded complete units. These units require additional packaging and crating and can only be shipped via Motor Freight.

The measurements that would be helpful are the length and depth of the counter space in which we have to work with, the height desired for the food shield, and the glass depth and thickness. An architectural plan of the area is always helpful. Our food shields can all be fabricated to accommodate both 1/4" and 3/8" thick glass, with the exception of the groove tube food shield posts which can only accommodate 1/4" glass.

Custom food shields can also be fabricated in 1 1/2" and 2" tube. Optional mounting options are also available, and include either flange mounted or an under the counter (concealed) mount. Side glass is another custom fabrication that is frequently added to our posts. This is usually required when the food shield ends on an open side where the food is open to customers or any foot traffic. The average turnaround time for custom fabricated posts is approximately five to seven days after receipt of order and/or payment.

The cost to custom fabricate our food shield posts is not much more than our stock posts since we manufacture most of our products on a per order basis and usually require only additional material to "customize" posts.  All of our food shield posts can be finished in any custom finish, and lights and/or heat lamps can be accommodated on some of our units.